Please see attached for the Zenvida 7 Piece Dining Set manual, there is one for the table and one for the chairs.
Note regarding Zenvida furniture:
Power tools may strip bolts or screws. Hand tighten bolts to only about 75% tight. Do NOT completely tighten any bolt during assembly until all bolts are connected.
-The table top has a horizontal support bar in the middle
- In addition, if the table top bends in the middle with very little weight, the table top must be replaced.
- Table measures 55.25" L x 31.5" W x 30" H, weight limit 100 lbs.
- Chairs measure 15.5" W x 14.75" D x 32.5" overall H (17" seat height), weight limit 200 lbs.